Share this Job

O&M Tech Senior, Measurement - Sapulpa

Apply now »
Apply now

Date: Jan 29, 2019

Location: Sapulpa, OK, US

Company: Enable Midstream

 

Summary:

Responsible for the daily operations, maintenance, troubleshooting, testing and calibration of natural gas measurement equipment. Performs gas quality and contaminant testing for compliance with the company’s gas composition requirements. Maintains and troubleshoots communication equipment and systems for reliable collection and transfer of measurement-related data to the main computer systems. Maintains and troubleshoots control valves and pressure regulation at receipt and delivery points. Reviews measurement data for accuracy and makes necessary edits of data. Performs all tasks in a manner that supports the company’s mission, vision and goals. Ensures that the facilities are operated, within safe operating limits, and maintained in compliance with all company policies and procedures and applicable local, state and federal rules and regulations including but not limited to DOT/PHMSA regulations.

 

This position handles complex responsibilities related to the primary focus of job area. Proficient in a range of processes or procedures within the area of responsibility. Works under minimal supervision. May act as an informal resource for less experienced employees. Resolves most questions and problems. Refers only the most complex issues to higher levels. Fully understands principles of technical field. Identifies key issues and patterns from partial or conflicting information. May adapt procedures, processes and techniques to meet more complex requirements of the position.

 

Essential Duties & Responsibilities:

  • Evaluate operations and make recommendations to procedures and guidelines.
  • Operate with latitude and review progress with management.
  • Provide input on projects to assure designs meet measurement criteria.
  • Coordinate field activities related to the installation, startup and operation of new equipment.
  • Provide technical answers and summary information to supervision and other technicians as needed.
  • Assist in the preparation and training of technicians for the certification tests and help administer the tests.
  • Trained and competent in the operation and maintenance of gas chromatographs.
  • Understand and apply the functional concept of operation of a gas chromatographs.
  • Test, operate and maintain over-pressure protection control valves and regulators for DOT compliance.
  • Install and calibrate analyzers used to detect gas contaminants. Configure systems to alarm or control on high-level detection.
  • Provide formal and informal training to less experienced technicians on basic to advanced measurement principles, operation and maintenance of equipment, and the use of computer applications.
  • Provide technical expertise to Measurement/Project engineers on measurement-related projects.
  • Develop spreadsheets to evaluate data, perform calculations in troubleshooting measurement data, and graphing data.
  • Perform analysis of balance segments and utilize computer tools to locate and correct faulty measurement data.
  • Perform troubleshooting of transmitters and electronic equipment.
  • Advanced utilization of volt meter and troubleshooting.
  • Advanced knowledge in the analysis of flow and energy data and the utilization of tools to determine the correct data for an edit. Ability to perform the calculation of vents and unmeasured volumes.
  • Maintain existing databases, spreadsheets, EFM programs, and other electronic files used in performing job measurement duties, and work planning/documentation files.
  • Perform basic operational checks on gas chromatographs and ultrasonic meters as assigned.
  • Apply AGA standards in the audit of meters.
  • Application of AGA 3 standards for orifice metering in the field, including the routine inspection of the primary elements and basic troubleshooting.
  • Routine verification and calibration of pressure and temperature transmitters.
  • Install and maintain auto-samplers; obtain gas samples per GPA, API and Enable sampling methods.
  • Install, calibrate, test, inspect, operate, troubleshoot and maintain electronic recording devices (EFM).
  • Perform measurement calibrations and perform preventive maintenance on orifice meters according to measurement procedures.
  • Analyze flow and gas quality data using various computer programs.
  • May install and setup of flow computers, sampling systems, solar panels and batteries, and radio communications systems on a new meter.
  • Use applications to perform various calculations, create reports, send/receive emails and track meter testing.
  • May perform one or more multi-skilled operations, maintenance and installation duties in addition to the primary roles and responsibilities listed above. Responsibilities include but are not limited to: measurement, electronics, dehydration, treating, corrosion, pipeline, compressor, gas processing plants, amine treating facilities and regulatory compliance functions with direct guidance.

 

Minimum Education & Experience:

  • Associates Degree/Vocational Certificate -and- two (2) years’ directly related experience -or- five (5) years’ directly related experience.
  • Valid State Driver’s License.

 

Knowledge, Skills, Abilities:

  • Comprehensive knowledge of all gas measurement principles, measurement equipment, maintenance practices and operational requirements for the accurate measurement of gas flow and energy according to AGA, GPA and API standards.
  • May be required to understand liquid hydrocarbon measurement.
  • Knowledge and understanding of SCADA and the communications systems used in the operation of meter stations, control of flow and pressure, and data retrieval.
  • Ability to locate and track costs, material delivery status, complete PM orders, view inventory status, and run routine reports.
  • Ability to read all types of documents related to engineering projects such as scope of work, project plan charts (GANTT), P&ID drawings, electrical one-line drawings, construction drawings and equipment manuals.
  • Ability to perform advanced troubleshooting tasks on different communication equipment including Lease lines, modems, CDPD and Cellular phone systems.
  • Ability to perform complex chromatograph calibrations and troubleshooting.
  • Ability to operate, tune and maintain control valves and regulators for flow and pressure control.
  • Knowledge of the requirements for developing scopes and project plans for implementation and completion of small projects. Ability to supervise contractors used in small projects.
  • Demonstrate advanced knowledge in troubleshooting and repair of all types of equipment pertaining to instrument/electrical trade: a) 4-20 mA signal; b) gas contaminant equipment; c) electrical power including AC and DC; d) measurement (dry flow, electronic and pneumatic).
  • Maintain working understanding of the responsible meters and pipeline segment to maintain low ‘Lost & Unaccounted for’ (L&U) volumes and energy.
  • Ability to effectively communicate the concepts used in all tasks of a technician in leading a class or training topic.
  • Ability to recommend application of new technologies to improve or enhance accuracy and reliability.
  • Ability to develop spreadsheets and basic databases for analysis and record maintenance.
  • Ability to keep abreast of new technologies and equipment used in measurement or communications.
  • Ability to perform periodic measurement calibrations and perform preventative maintenance on all electrical, measurement, and instrumentation equipment, including linear, orifice and ultrasonic meters.
  • Ability to effectively use a personal computer with Microsoft Office Suite applications (Word, Excel, Outlook).
  • Effective communication skills necessary to promote compliance with procedures and cooperation with individuals at various levels throughout the organization.
  • Ability to conduct gas contaminant testing using industry methods similar to Kittigawa and Draeger tubes.
  • Understanding of the process and requirements for calibration of process variables such as temperature and pressure.
  • Ability to test, inspect, operate, troubleshoot and maintain electronic devices associated with measurement applications.
  • Ability to work and participate successfully in a team-based environment to accomplish assignments.
  • Operate as a self-starter with individual drive and initiative to start, develop and complete projects and initiatives. Recognize the need for projects or process changes. Coordinate scheduling of project work with multiple work teams or departments. Prepare and submit all required documentation.
  • Contribute to a positive working environment. Respect differences in others and contribute to a harassment free workplace. Voice questions and concerns in a constructive manner. Seek to understand the opportunities associated with change, not just the potential for additional challenges.
  • Ability to communicate effectively with field employees, management and public, both orally and in writing.
  • Demonstrate commitment to compliance with applicable laws and regulations, company’s ethics code of conduct and other company policies and procedures.
  • Respect and follow safety policies and regulations; scan the environment for objects or people who may pose a safety risk; encourage others to utilize safe and healthy work practices.

 

Physical Requirements:

  • Ability to exert in excess of twenty (20) pounds of force frequently, and/or in excess of ten (10) pounds of force regularly to move objects.
  • May be required to lift fifty (50) pounds or more.
  • Physical ability to work around and on industrial equipment, including frequent climbing, stooping, reaching, pulling, pushing, twisting, bending, kneeling, crawling and grasping.
  • Ability to move about unrestricted and follow safety and emergency response procedures and regulations.
  • May be required to stand, sit, walk, stoop, kneel or crouch for reasonable periods of time.
  • Ability to travel long distances in a motor vehicle.
  • Ability to work in areas with limited access or cramped spaces.
  • On a routine basis, may climb ladders, walkways and scaffolds.
  • May be required to wear arc rated apparel/PPE.
  • May be required to wear SCBA.

 

Working Conditions:

  • Ability to work in potentially hazardous environments.
  • Ability to work with or near hazardous chemicals.
  • Ability to operate personal computer for extended periods.
  • Ability to travel frequently via truck (some overnight) to locations throughout the system to monitor equipment and perform work activities.
  • Ability to work outdoors in weather extremes and near equipment with potentially high noise levels.
  • Ability to carry a cell phone while on-call and respond to call-outs, potentially including weekends and holidays.
  • Ability to respond to emergency calls and/or call-outs and return to work while off duty.
  • Ability to work overtime (scheduled and/or unscheduled, nights and/or weekends), occasionally, as needed or required to meet established deadlines.
  • Based on business requirements, may be assigned to shiftwork.


Nearest Major Market: Tulsa
Nearest Secondary Market: Oklahoma

Job Segment: Electrical, Engineer, Telecom, Telecommunications, Law, Engineering, Technology, Legal

Apply now »
Apply now
Find similar jobs: